New Builds

Refurbished GE Ohmeda Care Plus 3000 Incubator

Refurbished GE Ohmeda Care Plus 3000 closed incubator with tilt-handle bed positions, servo or air temperature control, a passive humidifier and an oxygen inlet. The mattress takes up to 30 lb (13.6 kg), with room for litters, birds and small exotic patients.

Categories: Web ID: 30746
0 / 500

Description

Refurbished Care Plus 3000 3° or 6° Tilt Handles 30 lb Mattress Load

Closed Incubator for Small Patients

GE Ohmeda Care Plus 3000

A microprocessor-controlled incubator with a front-to-back airflow hood, built-in humidifier and lever-set bed angles.

30 lb

Mattress load rating

3° or 6°

Tilt handle positions

Under 60 dBA

Noise inside hood

20 min

Max temperature rise time

Overview

Care Plus 3000 units tilt with handles on the front of the bed. Press the locking button, push the handle down, and that end of the mattress rises to 3° or 6°, head up or feet up, then locks. Pull the handle up to bring the bed back to level.

Warm air moves front to back along the hood wall, or between the walls when the optional double-wall hood is fitted, and an integral passive humidifier adds moisture. Patient (servo) mode works from a skin probe at 95.0 to 98.6°F (35.0 to 37.0°C). Air mode runs 68.0 to 98.6°F (20.0 to 37.0°C), with an override to 102.2°F (39.0°C).

For a practice, that means a closed, humidified space for newborn litters after a cesarean, for chilled orphans and for birds or pocket pets that need warmth with little handling. The mattress is rated for 30 lb (13.6 kg).

Alarms and safety

The controller runs self-test and software checks at power-up and will not heat until a control temperature has been entered.

  • Power failure: nonsilenceable alarm
  • Patient temperature 1.8°F (1.0°C) from set point, adjustable to 0.9°F (0.5°C)
  • Air temperature 2.7°F (1.5°C) above or 5.4°F (3.0°C) below set point in air mode
  • Heater shutdown on a disconnected probe or air sensor, air circulation failure, or patient temperature over 107.6°F (42°C) or under 86°F (30°C)

Key Features

Oval portholes

Six oval portholes open for side access, with six tubing ports for lines and leads.

Oxygen inlet

Approximate hood oxygen of 25 to 45% at 5 L/min, 35 to 65% at 10 L/min and 45 to 75% at 15 L/min.

Passive humidifier

High setting about 65% RH and low setting about 45% RH (±10%) in a 77°F (25°C) room.

Foot-pedal elevating base

The optional base sets the mattress from 34 to 42 in (85 to 107 cm) above the floor, leaving both hands free.

Veterinary Applications

Clinics put a Care Plus 3000 to work after cesarean deliveries while the dam recovers, for orphaned or fading puppies and kittens that need gradual rewarming, for supplemental oxygen in small patients with breathing difficulty, and as a quiet holding space for debilitated birds and exotic small mammals coming out of anesthesia.

Available options

  • Hood: single wall or double wall
  • Stand: cabinet, or elevating base with or without storage units
  • Humidity: servo-controlled humidifier
  • Communications: ThermaLink with RS-232 serial data and nurse call
  • Dovetail rail system for rail-mount accessories

Ready To Build Your Quote?

Add the equipment you need and our team will follow up with pricing and availability.

Request a Quote