Description

LIFEPAK Defibrillator

The LIFEPAK 20 series was the first Physio defibrillator/monitor designed specifically for the hospital market. Physio-Control continues to be at the forefront of improving patient care with 20e and CODE SUMMARY™ to report a critical event record, including a cardiorespiratory event, vital signs log and the associated waveforms.

Using the data in the CODE-SUMMARY report, clinical teams can use CODE-STAT™ Data Review Software, to annotate chest compressions onto the patient’s continuous ECG report and calculate CPR statistics. Now you can facilitate quality analysis, helping you drive improvements to resuscitation outcomes.

Physio LIFEPAK 20e Defibrillator Features and Benefits

LIFEPAK 20e defibrillator/monitor with BLS/ACLS front door (1 per unit)
cprMAX™ technology version 1.5 (consistent with 2005 AHA/ERC Guidelines)
Active color matrix LCD screen
Manual and AED functionality
Built-in AC power
Lithium-ion rechargeable internal battery
ADAPTIV™ Biphasic, escalating energy up to 360J
Synchronized cardioversion
3- and 5-wire ECG monitoring capability with lead select (3-lead ECG cable included with ship kit)
CODE SUMMARY™ critical event record with data port

Recertified LIFEPAK 20E – Ready for Immediate Use

Our recertified LIFEPAK 20E units arrive fully tested and patient-ready, complete with all essential accessories for immediate operation. Each unit is backed by:
🔹 1-Year Warranty through ReNew Biomedical
🔹 30-Day Warranty on included accessories

Technical Specifications

The Physio-Control LIFEPAK 20e Defibrillator/Monitor is a versatile device designed for hospital and clinical settings, offering both manual and automated external defibrillation capabilities.

Below are its key technical specifications:

Physical Characteristics

Dimensions:
- Height: 8.4 inches (21.3 cm)
- Width: 10.3 inches (26.2 cm)
- Depth: 10.3 inches (26.2 cm)
Weight: 12.3 lbs (5.58 kg) without paper or cables

Display

Type: Color active LCD
Size: 4.53 inches (115.2 mm) width x 3.4 inches (86.4 mm) height
Resolution: 320 x 240 pixels
Waveform Display Sweep Speed: 25 mm/sec for ECG and SpO₂

Defibrillator

Waveform: Biphasic truncated exponential
Energy Settings: Selectable from 1 to 360 joules
Charge Time: Approximately 5 seconds to 200 joules with a new, fully charged battery

Pacing (Optional)

Type: Demand or non-demand (fixed) mode
Pulse Rate: 30 to 180 pulses per minute
Output Current: 0 to 200 mA (±5 mA or 5% of setting)

ECG Monitoring

Leads: 3-wire or 5-wire ECG cable
Bandwidth: 0.5 to 40 Hz or 1 to 30 Hz (user-selectable)
Input Impedance: ≥ 2.5 MΩ at 10 Hz

Printer

Paper Size: 50 mm (2.0 inches)
Print Speed: 25 mm/sec ± 5%
Delay: 8 seconds
Autoprint: Waveform events print automatically (user-configurable)

Power

AC Power: 100-240V AC, 50/60 Hz, 2.5 A
Battery: Internal rechargeable lithium-ion battery
Battery Operation Time: Approximately 90 minutes of monitoring or 50 full-energy discharges per charge
Recharge Time: Approximately 4.5 hours to 100% capacity

Environmental Specifications

Operating Temperature: 0 to 45°C (32 to 113°F)
Storage Temperature: -20 to 65°C (-4 to 149°F)
Relative Humidity: 5 to 95% (non-condensing)
Altitude: -382 to 4,572 meters (-1,253 to 15,000 feet)

These specifications ensure that the LIFEPAK 20e delivers reliable performance in various clinical scenarios, combining advanced defibrillation technology with user-friendly features.

Refurbished Lifepak Physio-Control 20E Defibrillator